Quantitative SEM–GLCM Texture and EDS Analysis of SS316 Stainless Steel Exposed to TiO₂ Nanofluids and Phase Change Materials

M. N. Lekhan *

Dairy Engineering Section, Southern Regional Station of ICAR-National Dairy Research Institute, Bengaluru-560030, Karnataka, India.

K. V. Vandana

Dairy Microbiology Section, Southern Regional Station of ICAR-National Dairy Research Institute, Bengaluru-560030, Karnataka, India.

*Author to whom correspondence should be addressed.


Abstract

Background: Stainless steel 316 (SS316) is used in heat-transfer equipment, but exposure to nanoparticle-containing fluids and phase change materials (PCMs) may alter its surface characteristics.

Aims: To characterise surface degradation of SS316 stainless steel exposed to TiO₂-based nanofluids and phase change materials (PCMs) using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and grey-level co-occurrence matrix (GLCM) texture analysis.

Study Design: An experimental study investigating the surface morphological, elemental, and textural changes in SS316 coupons exposed to TiO₂ nanofluids at concentrations of 0.5% and 1.0% (w/w) under dynamic-flow conditions and PCM-associated freezing–thawing cycles.

Place and Duration of Study: The study was conducted at the Dairy Engineering Section, Southern Regional Station, ICAR–National Dairy Research Institute, Bengaluru, over an exposure period of 80 days.

Methodology: Following exposure to the respective media, SS316 coupon surfaces were examined using SEM to assess surface morphology and localised damage. EDS analysis characterised elemental composition and identified the accumulation of titanium in damaged regions. Quantitative surface-texture analysis was conducted on SEM micrographs using GLCM-derived parameters, including contrast, correlation, inverse difference moment, entropy, and angular second moment, to evaluate changes in surface texture with exposure duration and TiO₂ concentration.

Results: SEM observations showed more pronounced pitting and larger pits in PCM-exposed coupons than in nanofluid-exposed coupons after 80 days. EDS analysis identified titanium accumulation within pits in coupons exposed to the 1.0% TiO₂ nanofluid. The combined analyses demonstrated distinct morphological, elemental, and textural changes under the two exposure conditions.

Conclusion: The integrated SEM, EDS, and GLCM approach provided complementary qualitative and quantitative characterisation of SS316 surface degradation following exposure to TiO₂-based nanofluids and PCMs. The observed differences in pitting, elemental distribution, and texture parameters indicate the potential of quantitative image analysis as a complementary tool for assessing surface alterations in stainless steel used in heat-transfer applications.

Keywords: SS316, TiO₂ nanofluids, scanning electron microscopy, gray-level co-occurrence matrix, image texture analysis, localized degradation, surface characterization


How to Cite

Lekhan, M. N., and K. V. Vandana. 2026. “Quantitative SEM–GLCM Texture and EDS Analysis of SS316 Stainless Steel Exposed to TiO₂ Nanofluids and Phase Change Materials”. Journal of Scientific Research and Reports 32 (11):1260-71. https://doi.org/10.9734/jsrr/2026/v32i114748.

Downloads

Download data is not yet available.